Blog

Blossoms in Bloom: Celebrate You Card

With the Misty Moonlight card and envelope from the Flowers for All Seasons Memories and More Cards and Envelopes and the Blossoms in Bloom bundle, you can create this beautiful card. Seaside Spray card stock pairs so nicely with Misty Moonlight card stock. Read on to see how to make this card and then send to your favorite person.

Blossoms in Bloom
Click HERE to watch the Video Tutorial

Measurements:

Misty Moonlight Cardstock: (1) 4.25″ x 5.5″, piece for outline of small flower
Seaside Spray cardstock: (1) 4.25″ x 5.5″; small piece for small flower
Whisper White cardstock: (1) 4″ x 5.25″, (1) 1.25″ x 4.25″ for sentiment

Directions:

  1. Die cut the following:
    • Outline of Blossoms & Bloom die from Misty Moonlight cardstock and the outline of the small flower. TIP: Use adhesive sheets on the back of Misty Moonlight cardstock before die cutting; this will make it easy to adhere outline die cut to the Blossoms and Bloom base cardstock. (see Figure 1)
    • Base of Blossoms & Bloom die from Seaside Spray cardstock and the base of the small flower. (See Figure 1)
    • Using the largest scalloped rectangle from from Stitched So Sweetly, die cut rectangle from Whisper White cardstock. Also use the stitched rectangle from the Ornate Layers dies from Whisper White cardstock for the sentiment.
Blossoms in Bloom
Figure 1
  1. Take adhesive backing off the back of the Misty Moonlight outline die cut. Punch out any die pieces that remain before adhering with the Take a Pick tool. Adhere the Misty Moonlight outline to the front of the Seaside Spray Blossoms and Bloom base. Take a long blade scissors and cut diagonally from the bottom right leaf to the upper left leaf, as shown by the dotted line in Figure 2. Each half will be used to make one card.
Blossoms in Bloom
Figure 2
  1. Take the backing off the Misty Moonlight outline for the small flower and adhere to the Seaside Spray flower base.
  2. Adhere the white scallop rectangle in the center of the card base, inside the white dotted lines. Adhere 1/2 of the Blossoms and Bloom die cut to the white rectangle frame.
  3. Stamp sentiment on white stitched rectangle in Misty Moonlight ink. Add small flower to right hand side of sentiment. Add pearl center to small flower. Use dimensionals to adhere the sentiment to the card base, as shown in the finished example.
  4. Tie bow with blue ribbon and adhere to card.

Supplies for Blossoms and Bloom card:

Bonus Days are here! For every $50 in Stampin’ Up products you purchase, you earn $5 bonus coupon to use on products in August. Shop here to earn your coupon!

Rooted in Nature Watercolor Technique Card

Watercolor is one of my favorite effects, although I cannot do it justice when I try to freehand it. This Rooted in Nature card uses an easy watercolor technique that you can use with any stamp.

Measurements:

Crumb Cake Cardstock: 5.5″ x 8.5″ scored at 4.25″ along the 8.5″ side; (1) 3.75″ x 5″, (1) 1.25″ x 4″, scrap for leaves
Mossy Meadow Cardstock: (1) 4″ x 5.25″, (1) piece for scallop
Watercolor Paper for stitched oval

Directions:

  • Fold Crumb Cake card base on score line and burnish.
  • Adhere Mossy Meadow layer to front of Crumb Cake card base.
  • Lightly Ink inside of Woodland embossing folder on the inside of the folder with the Stampin’Up Emblem with Crumb Cake ink, just so the raised portions of the embossing folder are inked. Lay 3.75″ x 5″ layer of Crumb Cake cardstock inside the embossing folder on the inked side and run through embossing machine.
  • Adhere and center the embossed crumb cake layer on top of the Mossy Meadow layer.
  • Stamp 2 leaves in Early Espresso ink and die cut. Die cut with the largest scalloped oval using Mossy Meadow cardstock. Die cut with the largest stitched oval using the watercolor paper.
  • Ink the tree in Mossy Meadow ink and spray 2 spritz of water onto the stamp then stamp on the watercolor paper. Let dry.
  • Use a sponge dauber inked in Crumb Cake ink to apply a soft edge of ink around the edges of the oval watercolor paper.
  • Adhere oval watercolor paper to Mossy Meadow scallop oval. Use dimensionals to apply the layered ovals to the left upper front of the card.
  • Use dimensionals on the back of the 2 leaves and arrange on front of card as shown. Apply linen thread bow to top of leaves with glue dot.
  • Stamp sentiment on the 1.25″ x 4″ piece of Crumb Cake in Early Espresso ink. Use banner punch on right edge. Apply with dimensionals to bottom front of card.
Click here to watch tutorial for this Rooted in Nature Watercolor Technique

Supplies:

Stampin Up Whale Done – Floating Gatefold Card

It’s so fun and easy to create an ‘under the sea’ scene with Stampin’ Up’s Whale Done bundle and coordinating paper. When you add the coordinating sequins, it creates a beautiful sparkle to the card. Open the doors of this gatefold card and it reveals some floating under the sea creatures!

Measurements:

Pretty Peacock Base cardstock: 8.5″ x 5.5, scored” at 2 1/8″ and 6 3/8″; cardstock for 2 seaweed die cuts and spout from punch; (1) 10.75″ x 1.25″ scored at 2 1/8″ and 6.5″ along 10.75 edge for belly band
Balmy Blue cardstock: (2) 1″x4.5″ scored at 1″, 2.5″, & 3.5″along the 4.5″ edge for arms, (1) piece for label
Whisper White cardstock: (2) pieces for greeting label
Whale of a Time Designer Series Paper: (3) 2″ x 5.25″ of the seaweed print; (1) 4″x5.25″ and (1) 2″x5.25″ cut consecutively from one of the scenic patterns
Granny Apple Green for seaweed die cut
Vellum for seaweed die cut

Directions:

  1. Fold card base on score lines so that doors form on the front of the card.
  2. Adhere the seaweed patterned designer series paper to door fronts.
  3. Adhere the designer series paper to the inside, with the 4″x5.25″ scene in the center panel.
  4. Fold the 2 Balmy Blue 1″x4.25″ strips in the same direction along all the score lines. Fold each end toward center and and apply adhesive (tear and tape is recommended) See Figure 1 example.
Figure 1: Example of how to fold the arms and apply tear and tape.
  1. Apply Balmy Blue arms to inside of card where desired. This card shows one arm in the lower left and one in the upper right. To do this, take off tear and tape adhesive on the end by the longest section of the arm strip. This end will be applied to the inside panel next to the score line. (See Figure 2.) Take tear and tape of the other end and apply to center panel of card base by lying arm flat (so 2 scored sections show on the top) and the taped end tucked under and tape facing card base. Repeat for second arm.
Figure 2: Example of how to apply the arm
  1. Decorate arms. Fussy cut a turtle from the designer series paper. You can punch a whale from the designer series paper, as shown in this card, or stamp one in pretty peacock and then punch out using whale punch. Die cut 6 seaweed: 2 each from vellum, 2 from Granny Apple Green cardstock, and 2 from Pretty Peacock cardstock. Adhere 3 seaweed to the lower arm and adhere the turtle on top. Adhere sequins as desired. My video showed applying the sequins with a glue dot and using the Take Your Pick tool to position on card. Adhere the whale to the upper right arm.
  2. Belly band: Burnish scored lines of belly band, and wrap band around card so ends overlap in the front of the card and small end is on top. Adhere belly band ends together. Die cut a Balmy Blue label and 2 white labels. Stamp sentiments on white labels using Pretty Peacock ink. Add Balmy Blue label to front of belly band with dimensionals. Add white label with front sentiment on top of Balmy Blue label. Decorate with 3 seaweed, a punched whale adhered with dimensionals, and a spout made from whale punch and Pretty Peacock paper. Add sequins as desired. Adhere inside sentiment to inside of card. Enjoy your ‘under the sea’ scene!

Supplies for Stampin Up Whale Done card:

Stampin Up Celebrate Sunflowers: Floating Gatefold Card

Make a gatefold card using the Stampin’ Up Celebrate Sunflowers bundle with a floating sentiment and a sunflower flower on the inside! A fun surprise for the recipient. This is such a versatile technique for any occassion. Learn how easy it is to make this card with the attached tutorial.

Stampinup CelebrateSunflower Floatinggatefold
Celebrate Sunflower Floating Gatefold Card

Measurements (using Misty Moonlight example, center card in photo):

Base Cardstock (Misty Moonlight): 8.5″ x 5.5, scored” at 2 1/8″ and 6 3/8″, 1″x4.5″ scored at 1″, 2.5″, & 3.5″
Flowers for Every Season Designer Paper: (2) 2″ x 5.25″
Whisper White cardstock : 4″ x 5.25″, 3.5″x 3.5″ for sunflower outline
Bumblebee cardstock: 3.5″x3.5″ for sunflower base
Cinnamon Cider cardstock piece for sunflower center and sunflower leaves

Directions for Celebrate Sunflowers:

  1. Fold card base on score lines so that doors form on the front of the card.
  2. Add designer series paper to door fronts.
  3. Put adhesive on the back of the leaves, and fit the leaves behind the sunflower.
  4. Next, stamp the sunflower in Misty Moonlight ink then die cut. Die cut the sunflower outline from white paper and adhere to the front of sunflower base. Tip: Use adhesive sheets on the white card stock for the sunflower outline before die cutting; this makes it easy to apply to sunflower base. Find the 3 curved petals on sunflower for easy alignment (See Figure 1). Die cut sunflower center and adhere sunflower center with a dimensional.
Figure 1. Line up sunflower outline die cut using 3 currved petals as starting point.
  1. Put 3 dimensionals (in a triangle formation) on the right door of front of card near center where sunflower will be applied. Center and apply sunflower to front of card.
  2. Stamp sunflower in Bumblebee ink in the center of the 4.5″x5.25″ white cardstock and adhere to the center panel on the inside of the card.
  3. Fold in the same direction along all the score lines on the 1″x4.5″ arm strips. Fold each end toward center and and apply adhesive (tear and tape is recommended). (See Figure 2)
Figure 2: Apply tear n tape to arm strips
  1. Apply arms to inside of card, where desired. Take off tear and tape adhesive on the end by the longest section of the arm strip. This end will be applied to the inside panel next to the score line. (See Figure 3.) Take tear and tape of the other end and apply to white cardstock. Repeat for second arm.
Figure 3: how to apply arms to inside of card
  1. Stamp sentiment in memento ink and apply to the top of one of the inside arms. Stamp, die cut and color with blends the small sunflower and adhere to the other inside arm.

Forever Fern: Stampin Up Masculine/Father’s Day Card

With just a little extra measuring and cutting on your paper trimmer, you can make this striking card layout for any occasion–just change the sentiment. Because this layout is tailored, it makes a great Father’s Day card. The Forever Fern bundle and coordinating dies are a great set for making a Stampin Up masculine card for any occasion…the foilage is so beautiful! Its easy to add branches and leaves as an accent to any card using the coordinating dies. Click Here to check out my Pinterest board for more inspiration using this fabulous set!

Measurements:

  • Very Vanilla Cardstock: (1) 3.25″ x 4.25″; (2) 4″ x 5.25″; (1) 3/4″ x 3 3/8″ strip for sentiment, piece of for stamped branch image
  • Pretty Peacock Cardstock: 5.5″ x 8.5″, scored at 4.25″ on the 8.5″ side; 3 3/8″ x 4 5/8″
  • Basic Black Cardstock: 3.5″ x 4.75″; 2″ x 3.25″

Directions for Stampin Up Masculine Card:

  1. To make a point on the black 2″x 3.25″ cardstock: With a pencil, mark 1″ on each side of the 2″ side of the cardstock. Mark 1 5/8″ in the center of the 3.25″ side. Place paper in paper trimmer at a diagonal in the cutting groove so that it cuts from the 1″ mark to the 1 5/8″ mark. Repeat for the other side.
  2. To make a point on the vanilla 3.25″ x 4.25″ cardstock: With a pencil, mark 1.75″ on the 4.25″ on each side of the 4.25″ side of the cardstock. Mark 1 5/8″ in the center of the 3.25″ side. Place paper in paper trimmer at a diagonal in the cutting groove so that it cuts from the 1.75″ mark to the 1 5/8″ mark. Repeat for other side.
  3. Adhere the black cardstock with the point behind the vanilla with the point so edges are lined up side to side and enough black is showing.
  4. Stamp branch in Pretty Peacock on Vanilla piece with point then add black speckles in Momento ink around branch.
  5. Fold the Pretty Peacock card base and burnish the fold with a bone folder. Add the following layers in order:
    1. Very Vanilla 4″ x 5.25″
    2. Black: 3.5″ x 4.75″
    3. Pretty Peacock: 3 3/8″ x 4 5/8″
    4. Very Vanilla with Point (includes the black cardstock with point adhered from Step 3.)
  6. Stamp branch in Pretty Peacock on Very Vanilla and die cut. Put dimensionals on the back and adhere to front of card.
  7. Stamp sentiment on label strip then punch each end using the Pick a Punch. Mount dimensionals on back of sentiment and add to front of card.
  8. Add a black sequins to vanilla point using glue dot. If you don’t have black sequins, but you have a black blend pen, you can color any sequins to make it black!

Supplies used for Stampin Up Masculine/Father’s Day Card:


Stampin’ Up! Annual Catalog Kickoff Celebration – Extra Host Rewards For YOU!!

The brand new 2020–2021 Stampin’ Up! Annual Catalog is going live on June 3 2020, and Stamipn’ Up! is having a celebration!

Anyone who places an order of $250+ or holds a party with $250+ in sales during the month of June will receive $25 in extra Stampin’ Rewards!!  So that means that you’ll earn $50 in Stampin’ Rewards with any order or party of $250+ that is submitted between June 3 and June 30! Yay!!! Head over to my online store here to place your order!


Stampin’ Up! Pick A Free Bundle Starter Kit Promotion!!

Wow!!!  Stampin’ Up! is offering an AWESOME promotion if you join during the month of June!!  You get to pick a FREE bundle of your choice with your Starter Kit Purchase!!

Here are the details:

  • Joining promotion dates:  June 3–30, 2020
  • New demonstrators who submit their Independent Demonstrator Agreement (IDA) before June 3 or after June 30 will not be eligible for this promotion.
  • When you purchase your Starter Kit for $99, you get to select $125 worth of products of your choice for your Starter Kit PLUS you get to select ONE stamp and punch bundle (p. 168–169) or ONE stamp and die bundle (p. 173-179) from the new 2020–2021 Annual Catalog—in addition to your regular Starter Kit for FREE.  And your Starter Kit always ships for free…double bonus!!

You can see more details about joining and about our team here on my blog here.  You can also see more information about the benefits of becoming a Stampin’ Up! Demonstrator here.

That is such a great deal!!  If you’ve been considering joining, June will be a great time to jump in!  Drop me an email [email protected]


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Online button on the right side of the screen to go directly to my online store or drop me an email at [email protected] if you have any questions.  Happy Stamping!

  • Visit my online store here.
  • Shop the Clearance Rack here.
  • Shop My Personal Sales here.
  • Don’t forget to follow me on Instagram, Pinterest, YouTube, Facebook. Links at top and bottom of this blog!

Stampin Up Mountain Air: Handmade Card

Do you love the mountains? I sure do…I enjoy using this set to create a beautiful handmade card with a mountain setting! It makes a great masculine card or a great card for anyone who loves the mountains! What mountains does this card remind you of? I remember a trip with my Mom to Silverton, CO via the Silverton train to the mountains. It was our last trip together in 2011 and it is a treasured memory. She loved the mountains. She would have enjoyed making a card like this or receiving it!

Measurements:

  • Sahara Sand Cardstock: (1) 3.75″ x 5″; (1) 2″ x 5″ (treeline); (1) 4.25″ x 5″ (inside); 1″ x 1.75″ for label
  • Early Espresso Cardstock: 5.5″ x 8.5″ scored at 4.25″ along 8.5″ side; 2″ x 5″ (mountains)
  • Mossy Meadow Cardstock: 1.75″ x 4″ (trees)
  • Seaside Spray Cardstock: 2.75″ x 4.75″ (blue background)
  • Smoky Slate Cardstock: piece for 5/8″ circle punch
  • Twine: 3″

Directions for Mountain Air Handmade Card:

  1. Die cut using the 2nd largest nested die from the 3.75″x5″ Sahara Sand cardstock; you will not use the inside nested die.
  2. Die cut using the 2nd largest nested die from Seaside Spray cardstock; you will be using the inside die, not the outside.
  3. Die cut a label using the 2nd to smallest nested die from Sahara Sand cardstock. Stamp sentiment on label using Early Expresso ink.
  4. Die cut a tree from Mossy Meadow cardstock.
  5. Die cut large mountains from the Early Espresso Brown cardstock.
  6. Stamp trees using Mossy Meadow ink and then use tree line die cut to cut out top of trees.
  7. Stamp moon using Smoky Slate ink and punch out a 5/8′ circle from moon.
Figure 1: Scene Layers
  1. Assemble scene on Seaside Spray Nested Label. Center brown mountains and adhere to label; there will extra cardstock hanging over label. Center trees on top of mountains and adhere. Trim off excess cardstock around the label.
  2. Place moon above mountains and stamp birds in Early Espresso ink above mountains.
  3. Assemble front of card: Place dimensionals on the back of the Sahara Sand 3.75″ x 5″ cardstock, on the outside corners and also close to the inside edge of the nested label cutout….behind the stitching preferred so it doesn’t show on the front of your card. Adhere to center of Expresso Brown card base.
  4. Adhere Seaside Spray label inside the Sahara Sand nested label cutout.
  5. Adhere Mossy Meadow tree die cut to left edge of front of card.
  6. Adhere twine trim to front of card. Cut 2 dimensionals (mini black dimensionals, preferred) in half and put 4 halves on the back of the sentiment label, wide enough apart that the dimensionals straddle the twine.
Figure 2

Supplies for Stampin Up Mountain Air Handmade Card:

Stampin’ Up! Annual Catalog Kickoff Celebration – Extra Host Rewards For YOU!!

The brand new 2020–2021 Stampin’ Up! Annual Catalog is going live on June 3 2020, and Stamipn’ Up! is having a celebration!

Anyone who places an order of $250+ or holds a party with $250+ in sales during the month of June will receive $25 in extra Stampin’ Rewards!!  So that means that you’ll earn $50 in Stampin’ Rewards with any order or party of $250+ that is submitted between June 3 and June 30! Yay!!! Head over to my online store here to place your order!


Stampin’ Up! Pick A Free Bundle Starter Kit Promotion!!

Wow!!!  Stampin’ Up! is offering an AWESOME promotion if you join during the month of June!!  You get to pick a FREE bundle of your choice with your Starter Kit Purchase!!

Here are the details:

  • Joining promotion dates:  June 3–30, 2020
  • New demonstrators who submit their Independent Demonstrator Agreement (IDA) before June 3 or after June 30 will not be eligible for this promotion.
  • When you purchase your Starter Kit for $99, you get to select $125 worth of products of your choice for your Starter Kit PLUS you get to select ONE stamp and punch bundle (p. 168–169) or ONE stamp and die bundle (p. 173-179) from the new 2020–2021 Annual Catalog—in addition to your regular Starter Kit for FREE.  And your Starter Kit always ships for free…double bonus!!

You can see more details about joining and about our team here on my blog here.  You can also see more information about the benefits of becoming a Stampin’ Up! Demonstrator here.

That is such a great deal!!  If you’ve been considering joining, June will be a great time to jump in!  Drop me an email [email protected]


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Online button on the right side of the screen to go directly to my online store or drop me an email at [email protected] if you have any questions.  Happy Stamping!

  • Visit my online store here.
  • Shop the Clearance Rack here.
  • Shop My Personal Sales here.
  • Don’t forget to follow me on Instagram, Pinterest, YouTube, Facebook. Links at top and bottom of this blog!

Stampin Up Sailing Home: Double Z-Fold Card

Need a masculine card? Sailing Home is a wonderful set to create beautiful masculine cards for any occasion. Making a card using a double z-fold card will surely WOW them! Two different patterned papers were used, showing you the versatility of this set! Have fun making this one!

Measurements (using Navy Card sample):

Outside Z card base:

  • Night of Navy cardstock: (1) 4.25″ x 11″ scored at 2.75″ & 5.5″ along 11 side
  • Come Sail Away Designer Series Paper: 2.5″ x 4″
  • Whisper White cardstock: 4″ x 5.25″

Inside Z card base:

  • Night of Navy cardstock: 3″ x 10″ scored at 2.75″ and 5.5″ along 10″ side; piece for stiched circle
  • Whisper White cardstock: (2) 2.5′ x 2.75″; piece for lighthouse, piece for sentiment
  • Soft Suede cardstock: Piece for wheel
  • Come Sail Away Designer Series Paper: 2.75″ x 4.25″

Directions:

  1. Burnish all creases with bone folder like a ‘ Z’ as shown in Figure 1.
  2. Stamp sailboat and birds on one of the small pieces of whisper white cardstock in Night of Navy ink.
  3. Adhere designer series paper and small white pieces to Inside Z card base.
  4. Adhere designer series paper and white cardstock to Outside Z card base.
Figure 1.
  1. Adhere Inside Z card base to Outside Z card base: To do this, fold outside card base so its easy to find center of card front. Put adhesive on 1/2 of the back of the Inside Z card base front and center and adhere on top of Outside Z card base. Put adhesive on the back of the Inside Z card base on last square (behind sailboat) Fold both bases together to adhere the last square (this will line up the last square for you).
  2. Die cut stitched circle in Navy Cardstock. Stamp lighthouse in Night of Navy ink and die cut. Die cut wheel in Soft Suede cardstock. Punch white label and stamp sentiment in Night of Navy Ink.
  3. Adhere label and navy stitched circle, where sentiment is slightly underneath circle. Add dimensionals to back of light house and adhere to center of navy blue circle. Adhere wheel to top of lighthouse. Use glue dot to apply small twine knot to center of wheel. (see Figure 2)
Figure 2

Supplies for Sailing Home Double Z-Fold Card:

Stampin’ Up! Annual Catalog Kickoff Celebration – Extra Host Rewards For YOU!!

The brand new 2020–2021 Stampin’ Up! Annual Catalog is going live on June 3 2020, and Stamipn’ Up! is having a celebration!

Anyone who places an order of $250+ or holds a party with $250+ in sales during the month of June will receive $25 in extra Stampin’ Rewards!!  So that means that you’ll earn $50 in Stampin’ Rewards with any order or party of $250+ that is submitted between June 3 and June 30! Yay!!! Head over to my online store here to place your order!


Stampin’ Up! Pick A Free Bundle Starter Kit Promotion!!

Wow!!!  Stampin’ Up! is offering an AWESOME promotion if you join during the month of June!!  You get to pick a FREE bundle of your choice with your Starter Kit Purchase!!

Here are the details:

  • Joining promotion dates:  June 3–30, 2020
  • New demonstrators who submit their Independent Demonstrator Agreement (IDA) before June 3 or after June 30 will not be eligible for this promotion.
  • When you purchase your Starter Kit for $99, you get to select $125 worth of products of your choice for your Starter Kit PLUS you get to select ONE stamp and punch bundle (p. 168–169) or ONE stamp and die bundle (p. 173-179) from the new 2020–2021 Annual Catalog—in addition to your regular Starter Kit for FREE.  And your Starter Kit always ships for free…double bonus!!

You can see more details about joining and about our team here on my blog here.  You can also see more information about the benefits of becoming a Stampin’ Up! Demonstrator here.

That is such a great deal!!  If you’ve been considering joining, June will be a great time to jump in!  Drop me an email [email protected]


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Online button on the right side of the screen to go directly to my online store or drop me an email at [email protected] if you have any questions.  Happy Stamping!

  • Visit my online store here.
  • Shop the Clearance Rack here.
  • Shop My Personal Sales here.
  • Don’t forget to follow me on Instagram, Pinterest, YouTube, Facebook. Links at top and bottom of this blog!

Stampin Up Card Ideas: Beautiful World

Do you need Stampin Up card ideas using the Beautiful World bundle? The new in-color Cinnamon Cider pairs so nicely with black–great for masculine cards! The Cinnamon Cider and Basic Black cardstock pair so well together. I love the new the Brass Foil–it’s so super shiny? I will be using this a lot! Tip for using foil paper: I like using the adhesive sheets to glue foil pieces on the card because there is less likelihood of getting glue on the front of the foil. If you do get glue on the front of the foil, rubbing it in one direction (and patience :-)) with your finger seems to work best for keeping it shiny!

Measurements:

  • Black Cardstock: (1) 4.25″ x 11″, scored at 5.5″ and 8.25″ along the 11″ side; (1) 3.25″ x 4.5″, 5/8″ small circle
  • Cinnamon Cider Cardstock: (1) 3.5″ x 4.75″; (1) 4″ x 2.75″; 2.25″x2.5″ for tag
  • World of Good Specialty Designer Series Paper: (1) 4″ x 5.25″; .5″ x 4″
  • Brass Foil Sheets: For globe, globe stand and swirly, 3/4″ small circle
  • Adhesive Sheets: For globe, globe stand and swirly shape

Directions:

  1. Prepare Brass Foil sheets with adhesive sheets on the back. Die cut globe, glove stand, and swirly from the brass sheet.
  2. Fold the black cardstock on the score lines, making a mountain fold with the 2 smallest sections (See Fig 1.)
Figure 1: Easel fold
  1. Place 4″ x 5.25″ piece of designer paper on the black cardstock in the largest section. Add the 3.5″ x 4.5″ Cinnamon Cider cardstock in the middle of the designer paper. This will be the inside sentiment.
  2. Adhere the 3.25″ x 4.5″ piece of black cardstock on top of the Cinnamon Cider 3.5″ x 4.75″ cardstock. Fold card on score lines. Center and adhere the Cinnamon Cide cardstock to front of card; only putting adhesive on the lower 1/2 of the cardstock where it adheres to the black folded section.
  3. Add .5″ x 4″ strip of designer paper to lower portion of card front.
  4. Take adhesive backing off globe and place in upper left of black card front, ensuring there is enough room on left edge to fit globe stand on the black cardstock.
  5. Take adhesive backing off globe and place over globe. Add 2 small gilded gems to globe stand ends.
  6. Die cut label with Cinnamon Cider cardstock. Stamp sentiment in upper portion of label, so there is enough room to add swirly without interfering with sentiment. Take adhesive backing off swirly and add to tag. Add dimensionals to the back of the label and add to front of card.
  7. Adhere the small black circle on top of the gold foil circle. Fold easel card, to determine the best placement for the gold circle to allow the card to stand. Place glue dot on upper portion of gold circle, leaving room at the bottom of the gold circle for the card to slip underneath. Add medium gilded gem to top of black circle.

Supplies for Stampin Up Card Ideas – Beautiful World card:

Stampin’ Up! Annual Catalog Kickoff Celebration – Extra Host Rewards For YOU!!

The brand new 2020–2021 Stampin’ Up! Annual Catalog is going live on June 3 2020, and Stamipn’ Up! is having a celebration!

Anyone who places an order of $250+ or holds a party with $250+ in sales during the month of June will receive $25 in extra Stampin’ Rewards!!  So that means that you’ll earn $50 in Stampin’ Rewards with any order or party of $250+ that is submitted between June 3 and June 30! Yay!!! Head over to my online store here to place your order!


Stampin’ Up! Pick A Free Bundle Starter Kit Promotion!!

Wow!!!  Stampin’ Up! is offering an AWESOME promotion if you join during the month of June!!  You get to pick a FREE bundle of your choice with your Starter Kit Purchase!!

Here are the details:

  • Joining promotion dates:  June 3–30, 2020
  • New demonstrators who submit their Independent Demonstrator Agreement (IDA) before June 3 or after June 30 will not be eligible for this promotion.
  • When you purchase your Starter Kit for $99, you get to select $125 worth of products of your choice for your Starter Kit PLUS you get to select ONE stamp and punch bundle (p. 168–169) or ONE stamp and die bundle (p. 173-179) from the new 2020–2021 Annual Catalog—in addition to your regular Starter Kit for FREE.  And your Starter Kit always ships for free…double bonus!!

You can see more details about joining and about our team here on my blog here.  You can also see more information about the benefits of becoming a Stampin’ Up! Demonstrator here.

That is such a great deal!!  If you’ve been considering joining, June will be a great time to jump in!  Drop me an email [email protected]


If you need any stamping supplies, I’d be very happy to be your Demonstrator.  Just click on the Shop Online button on the right side of the screen to go directly to my online store or drop me an email at [email protected] if you have any questions.  Happy Stamping!

  • Visit my online store here.
  • Shop the Clearance Rack here.
  • Shop My Personal Sales here.
  • Don’t forget to follow me on Instagram, Pinterest, YouTube, Facebook. Links at top and bottom of this blog!

Stampin Up 2020-2021 New In-Colors

Today’s project is a sneak peek of new products that will be available starting June 3 with the launch of the 2020-2021 Annual Catalog! It’s a quick & easy card layout featuring the new 2020-2022 In Colors! I couldn’t stop at just one, so I created 5 cards with a similar layout!

Here are closeups of each of the cards with the beautiful new colors:

Misty Moonlight In Color
Magenta Madness In Color
Just Jade In Color
Bumblebee In Color
Cinnamon Cider In Color

The sentiment comes from the To a Wild Rose stamp set and is stamped with black Momento ink. The flowers used were from To a Wild Rose and the new stamp set coming on June 3rd called Celebrate Sunflowers and cut using the coordinating die set.

The Flowers for Every Season Designer Series Paper coordinates with all 5 new In Colors–isn’t that fabulous? I added 2′ x 5.5″ strip to each of the cards in a coordinating pattern framed by a 2.25 x 5.5″ black cardstock.

Here are a few more examples using different colored flowers (note: the sunflower is die cut from So Saffron card stock):

Stampin Up Ornate Layers & Borders: Happy Birthday Card

This card really shows off the beauty of the Ornate Layers and Ornate Borders dies. This card is a great Happy Birthday card but any sentiment will do on this beautiful layout!

Measurements

  • Blueberry Bushel: (1) 8.5″ x 5.5″, scored along the 8.5″ side at 4.25″; (1) 3.75″ x 5″; scrap for flower
  • Whisper White: (2) 5.25″ x 4″; (1) 2.25″ x 3.75″ for frame die cut
  • Garden Green: scrap for leaves
  • Ribbon: 7″ for around card stock, 8″ for bow

Directions

  • Layer 5.25′ x 4″ white card stock on the Blueberry Bushel card front.
  • Die cut the flower border on the 5″ side of the 3.75″ x 5″ Blueberry Bushel card stock. Note: One edge of the die cuts through the paper and the other does not. Make sure the cutting edge is at the bottom of the card stock (side with more loops)
Figure 1
  • Wrap the ribbon around the middle of the blueberry bliss layer and adhere on the back with scotch paper (Fig. 1) Then adhere the 3.75″ x 5″ onto the white layer.
  • Die cut the small frame on whisper white with the Ornate Layers die. Stamp the sentiment onto the right side of the frame (along the long side of the frame) with blueberry bliss ink.
  • Die cut the small blue flower and die cut the green from one of the Ornate Border dies and adhere to the left side of the white frame.
  • Apply dimensionals to the back of the white frame and adhere to the right side of the card front. Add glue dot to bow and adhere to left side of card front.
  • Die cut the flower border on the 5.25″ side of the 4″ x 5.25″ of the Whisper White card stock. Note: One edge of the die cuts through the paper and the other does not. Make sure the cutting edge is at the bottom of the card stock (side with more loops)
  • Adhere to inside of card. Stamp sentiment with blueberry bliss ink in center.

Supplies

Copyright 2024 All Rights Reserved